LSC 13105589 : GENUINE Clutch Pipe Elbow Connector (Manual Only) - NEW from LSC

£7.775
FREE Shipping

LSC 13105589 : GENUINE Clutch Pipe Elbow Connector (Manual Only) - NEW from LSC

LSC 13105589 : GENUINE Clutch Pipe Elbow Connector (Manual Only) - NEW from LSC

RRP: £15.55
Price: £7.775
£7.775 FREE Shipping

In stock

We accept the following payment methods

Description

And might have used a spanner over the pipe to give more pushing power on the rear of the mating part. The early 207s between 2006-09 had a clutch hydraulic master/slave pipe part number 29557 E7 the problem is this pipe has a fixed nylon plug with a small swage mushroom on the pipe tip and is sealed with an O-Ring at either end.

The Early fitting was either built with a black rubber lip or was fitted with a small but Fat O-ring, the early pipe has a small swaged mushroom on its tip and the white nylon collar squshes the O-ring against this tip, later pipe has a collar swaged about 10-15 mm along its shaft and the split nylon plug expands to clip over this collar. We can supply a huge selection of Saab parts, including genuine Saab parts, aftermarket parts and performance parts. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .All our clutch fluid pipes are from trusted brands in the motoring industry, so you can count on them to be reliable and of excellent quality. You've probably no chance, I didn't even try I just replaced slave and master so everything was new. I took the slave cylinder and bulkhead adapter with me and just asked my local hydraulics place to make the hose accordingly. These include flywheels, so you'll have everything you need to repair this part of your car in one bundle. I have the other pipe to replace with the slave cylinder due to corrosion where it meets the slave cylinder?

Edited by Sardonicus on Friday 6th November 16:42Thanks Simon, Adrian Venn also came back with the following on face Book. Extruded Teflon tube with stainless steel single wire braid cover and clear PVC outer protective cover - cover must be cut back to take fittings.

Use copper grease on the fitting to coat the stainless spring fingers and it might come apart next time, but don't hold your breath. Come join the discussion about performance, reviews, reliability, modifications, troubleshooting, maintenance, for all models. Designed for under bonnet use with push in fittings secured with worm drive clamps or similar fittings in smaller sizes i. I left the original clutch hose in place while I routed the new one to ensure that I fitted it correctly and still managed to get it on the wrong side of the A/C pipe.

The Fiat "Quick Release" connector for the clutch line suffers a classic example of disimilar meta corrosion. I did find it was hard then just snapped together, only to find I had routed the pipe over rather than under near the bulkhead but was able to wiggle the whole thing to the point of being correct. Genuine Saab plastic connector fitted between the clutch pipe and slave cylinder, also connects to reservoir feed pipe. Stainless Steel braided fuel hose - suitable for commercial fuels and fuel mixtures up to a maximum of 50% Benzol. The connection is press in bayonet fitting very similar to a JG Guest or Hep2o domestic water pipe fitting.We are subscribed to the National Conciliation Service (NCS) which is the UK’s certified automotive retail Alternative Dispute Resolution (ADR) provider. I knew I should have left the old lines in place and just changed the cylinders (that’s a joke by the way!



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop