DYNOMEC DY1000 Locking Wheel Nut Remover Kit, 58.0 mm*270.0 mm*230.0 mm

£9.9
FREE Shipping

DYNOMEC DY1000 Locking Wheel Nut Remover Kit, 58.0 mm*270.0 mm*230.0 mm

DYNOMEC DY1000 Locking Wheel Nut Remover Kit, 58.0 mm*270.0 mm*230.0 mm

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Dynomec WT-6280 is 2019 launched accurate and repeatability dynamometer software for measuring power and torque output produced by an engine. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If anyone has this type without the washer it is advisable to get them off whilst you can and replace by the current type.

Dynomec WT-6140 is 2023 launched accurate and repeatability dynamometer software for measuring power and torque output produced by an engine. Don't know about the AA, but the RAC will attend to seized wheel nuts, but only if you've got a puncture and are stuck. I don't really fancy the "loosening the other bolts and then going for a drive" method to loosen the locking bolt either. This simple to use, this kit is capable of removing all locking wheel nuts on the market to date, with no damage to the wheel due to the protective steel shroud. In addition to its effectiveness and ease of use, the Kit is also versatile and can be used on a wide range of vehicles.Hammering an "undersize" double hex socket on will not work because of the rotating collar around the centre of the bolt and also, there is not enough room between the collar and the wheel bolt hole to allow the socket in. The tool does not rely on strength to work effectively, making it an ideal solution for anybody looking to remove locknuts without the key. It isnt the power guns which make these bolts stick, it is that over the years the taper mates too perfectly with the wheel and you have to overcome this friction of the taper with the key nut .

As the rounding of the key causes the key to lift out of the bolt when torqued I thought that as long as the glue bonded sufficiently to hold the clover leaf in then there should be enough contact for the cloverleaf pattern on the key to do the actual turning. As it happens it wasn't particularly tight so I can't imagine why the bolt had damaged in the first place, must have been made of chocolate.If you would like to see a full demonstration of the Locking Wheelnut Remover in action, visit below video page and see the product in action. My nuts :animal-smiley-037: are old and been on and off many times - or rather the bolts holding the wheels on my car are old and have been on and off lots of times! The all-inclusive set, boasts everything you'll need to deal with virtually anything on the market, future-proofing your successful removals.

later bolts from about 2006 have a washer which means you only have to overcome the friction of the washer . If anybody could suggest any other easy, and cheap, method to remove this bolt, I'd be very grateful. Introducing the Dynomec Locking Wheel Nut Remover Kit, The ultimate solution for removing virtually all locking wheel nuts on the market. The dynomec tool wouldnt be able to deal with these huge torques on siezed bolts or with damaged wavy slots . This isnt a DIY job due to the welding and professional type drill you will need , you need the car at chest height so you can get your whole body weight against the drill , so go to your friendly garage show them this method and good luck .

Actually, I'm that hacked off with not being able to remove my offside front wheel, do any of you know of any garage within 50miles of Darlington that uses Dynomec tools? The DYNOMEC Locking Wheel Nut Remover Kit is so effective that it is used by leading roadside recovery agents. It might just save people some time and effort putting this info out where its easy to find and the kit works.

These damn things are such a PITA to sort that I would rather run the risk of having the wheels nicked than bother with these silly devices. I also thought that if it failed the likely result would be that the key would detach itself by the key lifting off the bolt so I'd be no worse off and the welding trick could still be done.

This kit is also a cost-effective solution, as it eliminates the need for costly replacements or professional services.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop