Fluke T90 Voltage & Continuity Tester, Yellow

FREE Shipping

Fluke T90 Voltage & Continuity Tester, Yellow

Fluke T90 Voltage & Continuity Tester, Yellow

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


Fluke knows the cable assembly is often where failures occur. The cable on any Two-Pole voltage and continuity tester is its weakest point- it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place you at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts our testers through three times what the standard demands, flexing the cable over 150 degrees in each direction. This is why we can offer you our strongest voltage and continuity testers warranty ever. Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively. Näytön pito -toiminto jättää lukeman näyttöön niin pitkäksi aikaa, että voit tarkastella sitä vaivattomasti. (T130, T150) Fluken kaksinapaisten jännite- ja jatkuvuustesterien tuoteperheestä löydät käyttökohteisiisi ja mieltymyksiisi sopivat ominaisuudet, toiminnot sekä hinnan ja suorituskyvyn. Fluken jännite- ja jatkuvuustesterin valintaopas Ominaisuudet

Mittauskärkien suojus toimii myös lisäkahvana avattaessa Isossa-Britanniassa käytössä olevia turvasähköpistorasioita.The integration of a CableHealth function and indicator ensures that electricians are constantly and immediately informed of the health, safety and, therefore, the reliability of their Fluke T110 Two-Pole Voltage and Continuity Tester. Fluke T110 Two-Pole Voltage and Continuity Tester Overview Cable able to withstand 5000 bend cycles in both directions to 150°, exceeding the EN 61243-3 standard by up to three times (see the video below)

Two-pole voltage and continuity testers measure voltage, but just as important is when a voltage tester tells you that there is NOT voltage present before working on any circuit. For you to rely on your two-pole tester, it has to be the most rugged and reliable tester you can find. That’s what Fluke’s redesigned Fluke T110 gives you. Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)Fluke 6500, Fluke 6500-2, Beha-Amprobe GT-600, Beha-Amprobe GT-650, Beha-Amprobe GT-800, Beha-Amprobe GT-900

Launched as the e-commerce trading arm of Acutest, Test4Less is able to deliver low-cost, high-quality test equipment via our dedicated partnerships with big-brand manufacturers. Supplied for free in this promotional kit, the Fluke T90 Two-Pole Voltage & Continuity Tester can be used to detect whether voltage (12-690V) and continuity (0-400kΩ) are present. An LED scale indicates the voltage range. It is also equipped with a phase sequence indicator and practical features such as a remote probe for easier test activation and a heavy-duty, single-input cord. Kolme kertaa vaadittavaa taivutuskulmaa suuremmalla taivutuksella testattu kaksoiseristetty kaapeli parantaa luotettavuutta ja kestävyyttä.Fluken kaksinapaiset jännite- ja jatkuvuustesterit takaavat mittaustulokset nopeasti haluamassasi muodossa suurten ja helppokäyttöisten painikkeiden, kirkkaan taustavalon, summerin ja fyysisten ilmaisimien ansiosta. Vastusmittaukset 1999 Ω:iin asti. Näytön pito -toiminto parantaa käyttökokemusta. Parannettu ergonominen muotoilu tekee käytöstä helppoa (myös käsineet kädessä) sekä nopeuttaa mittapään telakointia. This product is ideal for any electrician and is the most effective way of identifying voltage levels within an electrical system. Fluke T110 Two-Pole Voltage/Continuity Tester Key Features

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop