UBIQUITI Networks UniFi 802.11AC 3x3 MIMO Outdoor Mesh Pro Access Point

FREE Shipping

UBIQUITI Networks UniFi 802.11AC 3x3 MIMO Outdoor Mesh Pro Access Point

UBIQUITI Networks UniFi 802.11AC 3x3 MIMO Outdoor Mesh Pro Access Point

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


Press and hold the reset button for 10 seconds (do this with caution, you do not need a lot of pressure) There are 4 main methods to resetting a UniFi Access Point: UniFi Physical factory reset, UniFi Controller factory reset, UniFi Debug Terminal Window Reset, and UniFi SSH factory reset. UniFi Physical Factory Reset Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.

So you want enterprise-class wifi at home, but don’t want to use a controller? Normally you install a Ubiquiti Unifi Access Points with a controller. This way you can easily manage multiple access points and keep them all in sync and up-to-date. But what if you don’t want to keep a pc running 24/7/? Do you really need to controller? Nope, you can just install the Unifi Ap with you mobile phone. This guide will tell you howto install an Unifi AP without a controller. Choosing the right Access Point Regional regulations must be observed when deploying radio equipment. More info Power Input Power Consumption Best is to place your access points on the ceiling or high on a wall if the ceiling isn’t possible. If both really are not an option for you, then the FlexHD might be a good solution. Keep in mind that furniture between the user and access point also limits the signal strength.

The antenna design of the HD is different compared to the other UniFi access points. It’s designed to cover a lot of clients in a small area. So the wireless network won’t spread as far as the other access points. Keep that in mind when you are placing the UniFi HD. With the UniFi controller software you can create a highly scalable, end-to-end system of devices spanning multiple locations across the world — all controlled by a single interface accessed via the Internet or local network. At the moment of writing, you can buy almost 20 different access points from Ubiquiti. There are also 3 new models available in the early access store. That is a lot to choose from, so we are going to divide the different models into groups. The Unifi 6 Pro is the next-generation high-performance access point for home and enterprise users. It’s capable of reaching 4.8 Gbps over the air with the 4×4 5Ghz channel, ensuring a reliable and fast wireless network connection in dense environments.

Note I have split the table in two, in the first table you will find all ceiling and wall mounted access points, and in the second the In-Wall and Range Extenders. The UAP-AC-M-PRO features simultaneous dual-band coverage via the 802.11ac enabled 3x3 MIMO connection, with speeds of up to 1300 Mbps on the 5GHz band and up to 450 Mbps on 2.4 GHz. The UniFi HD is designed for high-density environments, like a school or concert venue. The UniFi HD has two ethernet ports, where 1 port can be used to bridge to another access point or as an extra uplink. Dedicated hardware offload for QoS, Guest Control, and client management ensures high throughput and reduced latency. Unifi SDH – UAP-AC-SHD This is really your go-to access point for in-house usage. It’s affordable, small, and comes with excellent performance. It’s better to buy 2 lite models and spread them throughout the house than one long-range model. UniFi 6 Long Range – U6-LRThe quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.

At the moment of writing is this really the goto access point from Ubiquiti for outdoor installation. The advantage of the UniFi Mesh models is that they have antennas that are designed for long-range mesh performance. Making them great to cover large outdoor areas. Keep in mind that wired is always better, but that is outdoors not always an option. The UAP-AC-M-PRO features dual Gigabit Ethernet ports, the primary port is for data transfer and the second port is designed for bridging. Offering multiple power options, this enables users to power via an 802.3af PoE compatible switch or 24V passive PoE, options for power from a 802.3af compatible switch are also available. The UAP AC M PRO can also be powered by the included Gigabit PoE adapter. Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology. For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs. Guest Portal/Hotspot support I have not been in the industry in more than 15 years and therefore I am sorry if I have been much more long winded than need be to ask what I have asked, but I did not want to leave anything out, nor did I want to make it sound as if I was in over my head because I do not believe I am. As a side note, I also have on hand a 2 node Linksys Velop mesh set up that is in the box still that I am not sure where came from. If there is somewhere within this network that I might find utilizing this additional hardware advantageous I would be open to that. I thought perhaps kill the wifi from the CL device and instead wire a parent Velop node and child and then simply have the inteligent mesh whatever decide whether to send the wifi signal to the Ubiquity device at the garage wirth the paren t or child node. The Mesh Pro has 3 dual-band antennas, making it capable of reaching higher speeds. But the 3 antennas make it also a good base station for your outdoor mesh network. With a mesh network is one radio used to talk to the other access point (creating a wireless bridge), and the other is used to connect to the clients.Standalone mode allows you to set up and manage your UniFi AP without needing controller software. ” We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable At the moment of writing is the 6 Mesh still in early access. With a similar design as the FlexHD and given the name, I think the Unifi 6 Mesh is going to replace the FlexHD and Unifi Mesh in the near future. The specification of the access point look great, and the mounting options are really versatile (desktop, wall, pole, and ceiling)

Not everybody can mount their access points to the ceiling or wall. That is where the Unifi FlexHD comes in. This small and sleek design allows you to place insight, on a cabinet for example. It’s also possible to buy a ceiling or wall mount for the Flex HD. Simultaneous, dual-band, 3x3 MIMO technology, 802.11AC dual-band access point, capable of speeds of up to 1750 Mbps. In the early access store, we can also find the new Unifi 6 Mesh, which has the same design as the FlexHD and is likely going to replace the FlexHD in the near future. Read more about it in the outdoor section. UniFi In-Wall HD – UAP-IW-HD The last access points that we are going to take a look at in the UniFi AP comparison are the high density and enterprise models.

Choosing the right Access Point

The Ubiquiti UniFi AC Mesh Pro Wi-Fi Access Point is a simultaneous dual-band, 3x3 MIMO meshing access point designed specifically for large outdoor deployments. Capable of speeds up to 1750Mbps and supporting up to 100 clients per AP, the UAP-AC-M-PRO is perfect for demanding environments such as public parks, shopping centres or temporary deployments at festivals and events. The UniFi 6 Enterprise is a great access point if you need to support a lot of clients and want to be ready for the future. But for most home users, the Enterprise access point is overkill. This was one of the most popular access point from Ubiquiti. The nanoHD has a small diameter and great performance. The advantage of the nanoHD was always that you can get custom skins for it, and it supported a lot of concurrent clients. These models are normally not needed in a normal home network or small/medium office. The access points are designed for a specific purpose, for example, to handle a high amount of concurrent users or to cover a large area. The second method, the UniFi Controller Software Reset is also a fairly simple process; For this to work, you must have the UAP adopted by the UniFi Controller Software:

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop