HUAWEI WiFi WS5200 V2 AC1200 Dual Band Gigabit Wi-Fi Router, Full Gigabit Ethernet Ports, Wi-Fi Long Range, App Management, Easy Setup, Parental Control, Guest Wi-Fi, Dual Cores 800 MHz Processor

£9.9
FREE Shipping

HUAWEI WiFi WS5200 V2 AC1200 Dual Band Gigabit Wi-Fi Router, Full Gigabit Ethernet Ports, Wi-Fi Long Range, App Management, Easy Setup, Parental Control, Guest Wi-Fi, Dual Cores 800 MHz Processor

HUAWEI WiFi WS5200 V2 AC1200 Dual Band Gigabit Wi-Fi Router, Full Gigabit Ethernet Ports, Wi-Fi Long Range, App Management, Easy Setup, Parental Control, Guest Wi-Fi, Dual Cores 800 MHz Processor

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Though I have seen on the net a few other suggestions for the reset (such as holding for 30 secs, turning off power while doing this and turning on power again while holding reset button for another 30 secs). Wait about a minute (or longer) - the indicator on the CPE Pro should start blinking red (indicating it has detected the ws5200). Product size, product weight, and related specifications are theoretical values only. Actual measurements between individual products may vary. All specifications are subject to the actual product.

If it doesn't blink red then it hasn't detected the WS5200 and there is a problem - I'd try factory resetting the WS5200 using the long holds with a pin rather than the app) Press the H button on the CPE Pro to start pairing (if it starts blinking faster then pairing is happening)) Product battery capacity is typical value. The actual battery capacity for each individual product may be slightly above or below the nominal battery capacity.Connected by cable - that is what you would expect - a different network for the mesh (WS5200) (then you would just connect other WS5200 unit/units to the primary one using HiLink or the app - and turn off wifi on the CPE Pro. At least it confirms it is working. Wait until the indicator on the ws5200 turns steady green (takes a little while - 30s to a minute)- nothing instantaneous here Connect the router to the power supply and wait until the router completes the startup process. Use a needle or pin to press the RESET button on the router for more than two seconds until the indicator light goes out. Wait for the router to complete the restart process. When the indicator turns red, this indicates that the router has been restored to its factory settings. If the router has been factory reset, you need to configure it again. Huawei makes every effort at the time of publication to ensure the accuracy of product information it provides. Due to subsequent changes involving product batches, production and supply factors, it may be necessary for Huawei to make changes and adjustments to text and images so that they match the performance, specifications, indexes, and components of the actual product. Product information is subject to such changes and adjustments without notice.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop